EM118089 100A 230V Single Phase Din Rail Bidirectional RS485 Modbus MID Smart Meter for EV Charger

Product Introduction

Energy meters DDS353H-1/2/3 EM118089 (also MID certified models) are intended for energy measurements in single-phase electrical power network and can be used in residential, industrial, utility and EV-charging. It is a single phase DIN Rail meter, 100A, which is a multi-functional meter for energy monitoring.It is only 18mm width, but can support RS485 communication and comply with DIN EN 50022 standard, which is fit for the power distribution system for household and commercial. As a 63A 100A single-phase rail-mounted instrument, and a multi-functional power monitoring instrument. Only 18mm wide, supports SO output, bidirectional measurement, pulse constant of 1000imp/kWh, frequency of 50Hz/60Hz, and class B accuracy. Compliant with MID certificate and DIN EN 50022 standard, it is widely used in charging piles, domestic and commercial power distribution systems.It can read grid parameters, analyze the energy quality and load condition in the certain time period.DIN RAIL (Comply to German Industry Standard ) mounted.Only 18 mm wdith, but can achieve 100A.The meter has Li-battery for RTC. The RTC accuracy is 0.5s every day.Blue backlight, which is for easy reading in dark place.Do scrolling display for current(A) , voltage(V) , etc.Measure the active and reactive energy accurately.

Product Features 

(1)0.25(30A/32A/40A/45A/50/60/80/100A),

(2)Wide voltage range, 92V-230V, The lowest voltage can reach 40% of the standard voltage (EM118090)

(3)Active & Reactive, negative & positive Measurement

(4)RS485 Communication, SO Output

(5)Accuracy Class: Class B

(6)LCD Backlight, Multi-tariff, MID Approved, CE-EMC CE-LVD Compliant

Product Parameters

Product Dimension

Product Application

EM118089 single-phase din rail electric energy meter is with mini size,high accuracy,and it is easy to install. This series have also got CE& MID certificate. energy meters can measure electric energy with electrical pulse output function,and also can set parameters of clock,rate period and so on.It is suitable to measure electrical parameters in government and buildings. It can also be used with EV charging piles at the AC side. Energy meter ev digital for 1 phase systems are only 1 module wide and thus very easily placed in all types of power plants that have DIN mounting. The display also shows total consumption in kWh and instantaneous consumption in kW. By means of display buttons, information about current and voltage one the phase etc.